top of page
SUBSEA STRUCTURES
​

Subsea structure inspection is performed on assets such as platform legs and sub-structures to identify defects and to evaluate the condition. Besides providing the inspection service, Innospection is also experienced in providing customised solutions to solve niche inspection challenges related to the subsea structures.

CASE STUDIES
CAPABILITIES

 

An expert in Eddy Current techniques for non-destructive testing, Innospection has extensive experience surface breaking crack detection on onshore assets such as pressure vessels, tank floors, duplex pipes and CRA liners as well as on offshore assets such as platform legs and sub-structures.

Innospection’s capabilities in the subsea structure inspection include the following:

  • Detection of fatigue-induced surface breaking cracks and leaks on welds and cast nodes of the platform legs and sub-structures, particularly at the critical areas with the highest stress level, utilising Eddy Current techniques

  • Inspection of platform structural legs for corrosion detection utilising next generation MEC (Magnetic Eddy Current) technique. A simultaneous marine growth cleaning and inspection operation can also be performed with the incorporation of an advanced cleaning system.

  • Special cases such as the inspection of platform structural legs damaged by ship impact or platform legs with an unusual structure that obstructs the normal deployment of the inspection tool from the top.

Such inspections are performed utilising various NDE techniques such as Eddy Current for external cracks, Time of Flight Diffraction(TOFD) for internal cracks, Ultrasonic for thickness mapping and/or laser triangulation system for geometry scan. The techniques are deployed by a scan frame customised to the project requirements and scan areas.

pect12.jpeg
pect13.jpeg
BENEFITS

 

Crack Detection with Eddy Current Technique

Eddy Current is known to be the most sensitive technique for the detection of surface breaking cracks as well as Stress Corrosion Cracking (SSC) and offers the following benefits:

  • With a detection probability of over 90% including through the coatings, it is also the most suited technique for crack detection

  • It enables scratches to be distinguished from cracks when scanning in line with the feature (crack) orientation. The detection of cracks within an area of scratches is achieved by analysing the signal phase to signal amplitude and the variation of the Eddy Current frequencies used

  • Unlimited possibilities of arranging the Eddy Current sensors for adaptation to project scan requirements, detection scope and asset geometry. The crack detection sensitivity is the largest when the scanning is performed perpendicular to the orientation of crack

 

Corrosion Detection with MEC Technique

The detection of corrosion in subsea structures utilising the electromagnetic MEC (Magnetic Eddy Current) electromagnetic offers the following benefits:

  • High sensitivity and reliability in detecting internal and external defects including small and shallow pitting caused by bacterial corrosion (from Ø >3mm and 10% wall loss)

  • No coating removal for a faster and more economical inspection operation

  • Analysis of defect severity in terms of volume and wall loss

  • Direct sizing of defects during scanning without the need for Ultrasonic verification with accuracy of +/- 10% for onsite reporting and +/- 5% for special offline analysis

  • Cleaning of the asset down to its bare metal to produce good quality data is not necessary which is a major advantage over Ultrasonic capabilities

EQUIPMENT

 

Eddy Current Crack Detection Systems

Depending on the crack detection scope on the subsea welds, nodes and sub-structures, the inspection could be performed with the following:

  • Single Eddy Current sensor to be deployed by divers

  • Sensor array with multiple high resolution, spring-loaded Eddy Current sensors mounted onto a MEC-Combi Crawler

  • Customised scan frames or manipulators incorporated with high resolution Eddy Current sensor array and encoded drive system optimised for the inspection tasks

structureimg.jpeg
structureimg1.jpeg

MEC-Combi Crawlers

The sophisticated MEC-Combi Crawlers are designed and built to support subsea integrity assurance as well as to target inspection, deployment and subsea accessibility challenges. The MEC-Combi Crawlers offer the following advantages:

  • Cost effective inspection solution

  • Comprehensive inspection data within a single deployment through the incorporation of supporting inspection techniques such as:

    • High resolution Ultrasonic mapping

    • Pulsed Eddy Current Testing (PECT)

    • Time of Flight Diffraction (TOFD)

    • Laser triangulation system

    • Camera system

  • Deployable by divers or ROV from support vessels

  • Capable of self-crawling along the inspection surface to perform the scanning in axial and/or circumferential orientation

  • Ability to remain in stable contact with the inspection surface despite the turbulences and waves due to its integral buoyancy and magnetic system

structureimg3.jpeg
structureimg2.jpeg
downloads
capabilities
benefits
equipment
logo.png

PIPELINE & PILING SERVICES CO LTD

Bangkok Office

19 Soi Chaloem Phrakiat Rama 9 Soi 2 Sukhumvit 103 Road Nongbon, Pravet

Bangkok 10250

Thailand

 

+(66) 02-745-9348 to 51

+(66) 02-745-9397 to 8

+(66) 02-399-0908

sales@papsthailand.com

PIPELINE & PILING SERVICES CO LTD

Rayong Office

267/37 & 267/38 Sukhumvit Road

T. Mabtapud  A. Muang

Rayong 21150

Thailand

 

Tel: +(66) 038-608370 to 1

Fax: +(66) 038-608372

Email : sales@papsthailand.com

© 2020 All Rights Reserved by PAPS Thailand

bottom of page